Clymit 200

Remote Sensors

Air-Pollution Sensor		Detects 30 common air-borne horrors such as butane, tobacco smoke, alcohol, ethylene, carbon monoxide and others.
Door-Position Sensor		A magnetic door switch, connects to Clymit 200's IO state-condition port.
Smoke Sensor		Know when smoke invades your room.   Up to 3 sensors can connect to Clymit 200's IO ports.
Temperature & Airflow Sensor		Connects to Clymit 200's Remote-Sensor port.   Put one next to a fan and be alerted the minute it stops working.
Temperature Sensor		Connects to Clymit 200's Remote-Sensor port.   Put one in the A/C vent to detect problems at the source.
Temperature, Airflow & Humidity Sensor		A convenient 3-in-one sensor.   Connects to Clymit 200's Remote-Sensor port.
Water sensor		Acts as a conductivity bridges, connects to Clymit 200's IO port.

Power Sensors

Amp Detector		Converts alternating current (AC) into 0-5VDC signal.   Connects to Clymit 200's IO state-condition port.
Voltage Detector		Detects whether a power outlet is live or dead.   Connects to Clymit 200's IO state-condition port.
PowerClymit		Connects to Clymit 200's Remote-Sensor port, and provides reading on: ·   Volts ·   Volts (RMS) ·   Amps ·   Watts ·   KWh ·   Peak Volts ·   Low Volts ·   Power Quality
PowerClymit II		Connects to Clymit 200's Remote-Sensor port, allowing both receptacles to be remotely turned On/Off via Clymit 200, and provides reading on: ·   Volts ·   Volts (RMS) ·   Amps ·   Watts ·   KWh ·   Peak Volts ·   Low Volts ·   Power Quality