Rackit® Technology // Expert Solutions for the LAN Environment™ - KVM Switch, Server Rack, LAN management cables, KVM Switches, rackmount, computer rack
   Rackit Home  »  IT Racks  »  Wall-Mount Racks  »  Open Wall-Mount Racks

Overview Accessories Buy Now

Open Wall-Mount Racks

Government SalesWall-mount telco/network open rack solutions

Wallit Open RacksWallit™ wall-mount telco/network open rack-mount solutions are designed for mounting IT network and telecommunication equipment onto the wall.

Rackit's wall-mount telco/network rack-mount solutions typically get implemented in communication-closet space-saving applications, utilizing open Wallit™ racks for telco, distribution, smaller intercom, paging, and security systems, CAT-5, fiber, voice and most any communications mounting needs.

Wallit™ wall-mount brackets and boxes also facilitate small 'communication closet' applications for front-mounting data/telco infrastructure such as patch panels, Ethernet switches, hubs, routers, firewalls, KVM switches, etc.

A full range of shelves, cable-management systems, powere distribution units (PDUs) and accessories are available to complement the racks functionality, making Rackit's wall-mount enclosures suitable and adaptable to a variety of server and telco applications.

 

Available models include:

 

 

Wallit™ Box

WalitBox 200

Wallit™ Box offers a secure and space-saving way to mount one to four network appliances flush to the wall, featuring good cable-access and ease of equipment maintenance.

• 19" EIA 310-D compliant  for left, right, or vertical equipment orientation, flush to the wall
• Three-position depth-adjustable mounting rails
• A removable cover provides for excellent access
• Vented sides and an open back assure superb heat dissipation
• An open back provides for easy cable-access
• Built-in provisions for optional RackiTie for excellent cable-management
• Available in either 2U or 4U models

 

 

 


 

 

Wallit™ Bracket

WalitBracket 206Wallit™ Bracket accommodates light duty applications where cabinet rack-mounting is not practical, and space is limited.

• Ideal for mounting 19" EIA 310-D compliant patch-panels in a limited-space "communication closet"
• A swing out hinged stand-off bracket provides for easy front and rear access
• A quick release retractable pin fastener provides for a secured installation
• Affording either 6-inches or 12-inches of depth
• 1U models

 

 


 

 

Wallit™ Comm

Wallit CommWallit™ Comm racks offer a 19" rack-mounting capability on an open frame that is designed to be mounted to the wall, open for easy access and extensive cable management.

• Self-squaring bolt together assembly and design for easy on-site installation
• 19" EIA 310-D compliant with reversable rails: universal cage-nut style square holes on one side and #10-32 tapped holes on the other side
• 12" or 18" depth allowance
• Heavy-duty 14 gauge steel finished with black powder coating
• Sturdy uprights rated at 300 lbs., featuring pass-thru holes for easy cable access
• Available in 12U, 16U and 21U (approximately 21-, 28- and 37-inches high respectively)

 

 

 

 


 

 

Wallit™ CPU - Adjustable

Wallit CPUAdjustable Wallit™ CPU desktop/tower wall-mount/desk-mount brackets for getting the computer off the floor (or off the desktop).

Wallit™ CPU AD features tall flanges (with rubber bumpers) that adjust to the width of the computer and firmly keep it in place.
Wallit™ CPU FX ads the ability to get mounted underneath a work-surface, featuring both height and width adjustability. Two included Velcro straps secure the PC to the bracket both vertically and horizontally.
• Mount in minutes to any wall or desk
• Make it easy to secure and mount any desktop/tower PC to the wall or under a desk
• Heavy-duty steel finished with black powder coating

 

 

 

 

Wallit™ CPU - Fixed

Wallit CPUFixed Wallit™ CPU desktop/tower wall-mount/desk-mount brackets for getting the computer off the floor (or off the desktop).

• Two (2) models (for full size tower/desktop PCs and for small-form-factor PCs)
• Mounts in minutes to any wall or desk
• Makes it easy to secure and mount any desktop/tower PC to the wall or to the side of a desk
• Include a Velcro strap that secures the PC to the bracket
• Heavy-duty steel finished with black powder coating

 

 

 

Wallit™ CPU LCD

Wallit CPU LCDWallit™ CPU LCD allows you to mount a VESA compliant LCD monitor (15" to 22") and a thin-client to virtually any vertical surface.

You can use Wallit CPU LCD to wall-mount an LCD monitor alone, or a thin-client alone, or both together.

• Easy to install
• Low profile
• Monitor tilting of 15-30 degrees, up or down
• Monitor can easily get lifted and removed - no tools required
• Using a standard padlock blocks access to the thin-client and prevents the monitor's removal, safely securing the installation to the wall



 


 

 

Wallit™ Edge OX

Wallit Edge OXWallit™ Edge OX facilitates rack-mounting equipment from the side of the rack, thus occupying a very small wall-mount footprint.

• Side-load design for easy equipment installation
• Open on both sides, top, and bottom for easy access to equipment connections
• Cage-nut style rails (with square mounting holes)
• Heavy-duty construction with 350 lbs. weight-load capacity
• 12U; 19-inch deep
• Ships FedEx/UPS, pre-assembled

 

 

 


 

 

Wallit™ Flex

Walit Flex 12-18SWallit™ Flex racks offer a 19", or 23", or 24" rack-mounting capability in a 2-piece open rack that is designed to be mounted to the wall, or ceiling, or under a desktop.

• Flexible 2-piece design adjusts to the width of the mounted equipment
• Supports over 250 lbs. of mounted equipment
• Features side cutouts for easy cable access
• Fitted with pre-tapped #10-32 mounting holes on the front rails, EIA 310-D compliant
• 18-inches deep
• Available in 8U and 12U (approximately 14- and 21-inches high respectively)

 

 

 


 

 

Wallit™ Flush

Walit FlushWallit™ Flush wall-mount bracket allows rack-mounting equipment vertically or horizontally flush against the wall or under a desk, hence occupying minimal depth.

• Suitable for mounting DataCom equipment as well as servers
• Support 200 pounds of equipment
• Available in 2U (3½  in.), 3U (5¼ in.), and 4U (7 in.) models
• 19 inch rack-mounting with universal square mounting holes (uses cage nuts)
• 2 cable pass-through holes on the back of the unit

 

 


 

 

Wallit™ Hinge

Wallit HingeWallit™ Hinge accommodates light duty applications where cabinet rack-mounting is not practical, and space is limited.

• Ideal for mounting 19" EIA 310-D compliant patch-panels in a limited-space "communication closet"
• A swing out hinge provides for easy front and rear access
• 180 degree swing-out
• Affording 6-inches of depth
• Available at either 1U, 2U, 4U and 6U models
• Heavy-duty 14-gauge steel

 

 


 

 

Wallit™ Incline

Wallit InclineWallit™ Incline wall-mount racks provide 4U and 8U capacity for 2-post 19" rack-mounting, tilting mounting rails for easy equipment and cable access, optional 1U stationary rack-mount brackets and optional top/bottom covers.

• Tilting mounting rails for easy equipment and cable access
• Available (optional) cover for protection
• Available (optional) 1U brackets for stationary rack-mounting
• #10-32 tapped rails
• 12" rack-mount depth
• 90 degree swing down mounting frame
• 75 lbs. weight capacity

 

 

 


 

  

 

Wallit™ Shelf

Wallit ShelfDesigned to be mounted on a wall, Wallit™ Shelf provides a convenient way of keeping peripherals and other computer-related items easily at hand.

• 17" wide; 21" deep
• Side and front flanges keep components from falling off the shelf
• Optional flipped upside down mounting creating a flat surface
• 16 gauge steel with 100 lbs. weight capacity
• Black, semi-gloss powder-coating finish

 

 


  

 

Wallit™ Swinger

Walit Swinger, 12UWallit™ Swinger racks offer a 19" rack-mounting capability on an open swinging frame that is designed to be mounted to the wall, open for easy access and extensive cable management.

UL Listed• Swinging front gate with pre-tapped #12-24 mounting holes, 19" EIA 310-D compliant
• Reversible mounting design makes left- or right-hand swing-out possible
• Requires only minimal assembly on-site
• Built-in provisions for optional RackiTie for superb cable-management
• 18" or 24" (DP models) depth allowance
• Available in 12U, 19U and 25U (approximately 24-, 36- and 48-inches high respectively)

 

 

 


 

 

Wallit™ Tilter

Wallit TiltWallit™ Tilter Telco wall-mount rack provides 8U capacity, tilting mounting rails for easy equipment and cable access and optional security cover kit.

• Mounting rails tilt down to 90 degrees to provide unobstructed access to the back of the mounted equipment
• Optional security cover kit consists of a lift-off front panel and a top cover which can double as an equipment shelf
• Pre-tapped #12-24 8U front mounting rails
• A large cutout in the back and RackiTie slots on the side panels facilitate cable management
• Elaborate perforation pattern on the side panels ensure proper equipment ventilation
• Available Mounting Depth: 17⅞"



KVM Switch, Server Rack, LAN management cables, KVM Switches, rackmount, computer rack




 
Copyright © 1996-2017 Rackit ® Technology Corporation.  All Rights Reserved.     Rackit and the Rackit Logo are registered trademarks of the Rackit Technology Corporation.
KVM Switch, Server Rack, LAN management cables, KVM Switches, rackmount, computer rack