2-post, cable-management-friendly steel telco racks with built-in grounding studs
Available in 24U and 45U, Comit relay racks' welded L-bracket base and cold rolled steel design form a sturdy construction for a rigid, durable rack. Comit relay racks can hold up to 800* lbs. of equipment, including switches, patch panels, shelves, rack-mount keyboard trays, and more.
Comit relay racks feature four ¼-20 x 0.5" grounding studs on the inside of the rails (two on each rail, one at the top and one at the bottom) used for electrical grounding. These studs allow you to ground your equipment directly to the stud or with the use of bus bars (purchased separately).
The racks also include serrated tooth washers to allow the frame to be grounded during the assembly process. The washers, when tightened, dig in and remove paint from the steel surface, establishing electrical continuity throughout the rack.
When multiple Comit relay racks are needed, simply gang them together. Ganging holes on both sides of the frame make it easy to gang and secure multiple racks together. You can even gang both the 24U and 45U size racks together because the holes align.
The uprights also feature cable pass through holes to allow cabling to pass from one rack to the next.
Comit relay racks' completely open top design allows the racks to accept cable bundles. It also makes the racks compatible with most ladder racks and coordinating accessories.
When you need a 2-post rack that offers both strength and dependability - whether working with a wiring closet, telecom room, or data center - Comit relay racks are the ideal racking solution.
* To maintain its weight capacity, the rack must be bolted or secured to the floor. We always recommend installing your heaviest equipment at the lowest points on the rack.
KVM Switch, Server Rack, LAN management cables, KVM Switches, rackmount, computer rack