• 8U 19-inch EIA compliant, with universal square holes

• Fully vented

• Locking front door with a smoked scratch resistant grey acrylic window

• Front door frame embedded into chassis for security

• Tool-less removable front door

• Snap-in front rack rails make all adjustments tool-less

• Top and bottom knockouts for mounting an optional exhaust fan

• Top and bottom knockouts for cable access

• Supports over 250 pounds

Rack-mounting

• 1 set of front-mounting rails (one on right side, one on left side)
• 8U rack-mounting space (14" high)
• Mounting rails can be positioned anywhere within the depth of the rack in 1" increments
• Mounting rails' positioning in the rack requires no tools
• Minimum clearance to front door: 3/16"
• Maximum usable (internal) depth: 19¼"
• This rack requires cage nuts and mounting screws (not included)

Wall-mounting

• Five (5) mounting holes on each side of the enclosure's back panel, ¼" in diameter.
• Reversible design allows mounting to the wall with door opening to the left (default) or to the right.
• Wall-mounting hardware not included.

Cable access

• Four (4) 3" diameter round knockouts, 3" (on center) from the enclosure's back corners, two (2) on top, two (2) on bottom.
• Two (2) 4½" x 1½" elongated knockouts, 2" (on center) from the enclosure's back, centered side-to-side,  one (1) on top, one (1) on bottom.

Ventilation

• Front top and bottom chassis above and below the front door are vented
• Fan knockouts: 4½" diameter, top and bottom, 6" (on center) from the back of the enclosure.
• Optional 120mm low noise, fan 53 CFM (mounts inside enclosure). Comes with mounting hardware, finger guard, AC cord.

Security

• A key lock mounted on the side locks the front door.
• 2 keys provided.

Construction

• 14 gauge and 16 gauge steel
• Black powder-coat finish

Mechanical

• External Dimensions: 22¼W x 17¼H x 21½D
• Weight: 38 lbs.